Open Access Policy
Open Access Policy
International Journal of Sciences and Innovation Engineering is a body that publishes scientific original cutting-edge research articles in the field of Sciences, Engineering and Technology since year 2024. IJSCI is academic, online, open access (abstract), peer reviewed uses double blind review process.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of work of the author and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior.
Ethics topics to consider when publishing:
- Authorship of the paper: Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
- Originality and plagiarism: The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
- Data access and retention: Authors may be asked to provide the raw data in connection with a paper for editorial review, and should be prepared to provide public access to such data.
- Multiple, redundant or concurrent publication: An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. ijsci do not view the following uses of a work as prior publication: publication in the form of an abstract; publication as an academic thesis; publication as an electronic preprint. Information on prior publication is included within each ijsci and its journal Guide for Authors.
- Acknowledgement of sources: Proper acknowledgment.
- Disclosure and conflicts of interest: All submissions must include disclosure of all relationships that could be viewed as presenting a potential conflict of interest.
- Fundamental errors in published works: When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper.
- Reporting standards: Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance.
- Hazards and human or animal subjects: Statements of compliance are required if the work involves chemicals, procedures or equipment that have any unusual hazards inherent in their use, or if it involves the use of animal or human subjects.
- Use of patient images or case details: Studies on patients or volunteers require ethics committee approval and informed consent, which should be documented in the paper.
International Journal of Sciences and Innovation Engineering follows strictly follow the following ethics and policies:
Open access is an ongoing publication practice which differs in the way traditional methods of publishing papers to the public get submitted, reviewed, authenticated and finally published. In Open Access publication model neither readers nor a reader’s institution are charged for access to articles or other resources. Users are free to read, download, copy, distribute, print, search, or link to the full texts of these articles for any non-commercial purpose without requiring a subscription to the journal in which these articles are published. ijsci ethics are based on COPE available at https://publicationethics.org/about
ijsci follows the Open Access model. The publication cost should be covered by the author’s institution or research funds. These Open Access charges replace subscription charges and allow the BEIESP to make the valuable published materials freely accessible to all interested online visitors, especially the researchers and young scholars from developing countries
Duties of Editors
- Fair play and editorial independence: Editors evaluate submitted manuscripts exclusively on the basis of their academic merit (importance, originality, study’s validity, clarity) and its relevance to the journal’s scope, without regard to the authors’ race, gender, sexual orientation, ethnic origin, citizenship, religious belief, political philosophy or institutional affiliation. Decisions to edit and publish are not determined by the policies of governments or any other agencies outside of the journal itself. The Editor-in-Chief has full authority over the entire editorial content of the journal and the timing of publication of that content.
- Confidentiality: Editors and editorial staff will not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.
- Disclosure and conflicts of interest: Editors and editorial board members will not use unpublished information disclosed in a submitted manuscript for their own research purposes without the authors’ explicit written consent. Privileged information or ideas obtained by editors as a result of handling the manuscript will be kept confidential and not used for their personal advantage. Editors will recuse themselves from considering manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships/connections with any of the authors, companies or institutions connected to the papers; instead, they will ask another member of the editorial board to handle the manuscript.
- Publication decisions: The editors ensure that all submitted manuscripts being considered for publication undergo peer-review by at least two reviewers who are expert in the field. The Editor-in-Chief is responsible for deciding which of the manuscripts submitted to the journal will be published, based on the validation of the work in question, its importance to researchers and readers, the reviewers’ comments, and such legal requirements as are currently in force regarding libel, copyright infringement and plagiarism. The Editor-in-Chief may confer with other editors or reviewers in making this decision.
- Involvement and cooperation in investigations: Editors (in conjunction with the publisher and/or society) will take responsive measures when ethical concerns are raised with regard to a submitted manuscript or published paper. Every reported act of unethical publishing behaviour will be looked into, even if it is discovered years after publication. AP-SMART editors follow the COPE flowchart when dealing with cases of suspected misconduct. If, on investigation, the ethical concern is well-founded, a correction, retraction, expression of concern or other note as may be relevant, will be published in the journal.
Duties of Editors
- Contribution to editorial decisions: Peer review assists editors in making editorial decisions and, through editorial communications with authors, may assist authors in improving their manuscripts. Peer review is an essential component of formal scholarly communication and lies at the heart of scientific endeavor. AP-SMART shares the view of many that all scholars who wish to contribute to the scientific process have an obligation to do a fair share of reviewing.
- Promptness: Any invited referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should immediately notify the editors and decline the invitation to review so that alternative reviewers can be contacted.
- Confidentiality: Any manuscripts received for review are confidential documents and must be treated as such; they must not be shown to or discussed with others except if authorized by the Editor-in-Chief (who would only do so under exceptional and specific circumstances). This applies also to invited reviewers who decline the review invitation.
- Standards of objectivity: Reviews should be conducted objectively and observations formulated clearly with supporting arguments so that authors can use them for improving the manuscript. Personal criticism of the authors is inappropriate.
- Acknowledgement of sources: Reviewers should identify relevant published work that has not been cited by the authors. Any statement that is an observation, derivation or argument that has been reported in previous publications should be accompanied by the relevant citation. A reviewer should also notify the editors of any substantial similarity or overlap between the manuscript under consideration and any other manuscript (published or unpublished) of which they have personal knowledge.
- Disclosure and conflicts of interest: Any invited referee who has conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies or institutions connected to the manuscript and the work described therein should immediately notify the editors to declare their conflicts of interest and decline the invitation to review so that alternative reviewers can be contacted. Unpublished material disclosed in a submitted manuscript must not be used in a reviewer’s own research without the express written consent of the authors. Privileged information or ideas obtained through peer review must be kept confidential and not used for the reviewer’s personal advantage. This applies also to invited reviewers who decline the review invitation.
Duties of Authors
- Reporting standards: Authors of original research should present an accurate account of the work performed and the results, followed by an objective discussion of the significance of the work. The manuscript should contain sufficient detail and references to permit others to replicate the work. Review articles should be accurate, objective and comprehensive, while editorial ‘opinion’ or perspective pieces should be clearly identified as such. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
- Data access and retention: Authors may be asked to provide the raw data of their study together with the manuscript for editorial review and should be prepared to make the data publicly available if practicable. In any event, authors should ensure accessibility of such data to other competent professionals for at least 10 years after publication (preferably via an institutional or subject-based data repository or other data centre), provided that the confidentiality of the participants can be protected and legal rights concerning proprietary data do not preclude their release.
- Originality and plagiarism: Authors should ensure that they have written and submit only entirely original works, and if they have used the work and/or words of others, that this has been appropriately cited. Publications that have been influential in determining the nature of the work reported in the manuscript should also be cited. Plagiarism takes many forms, from “passing off” another’s paper as the author’s own, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical publishing behaviour and is unacceptable.
- Multiple, duplicate, redundant or concurrent submission/publication: Papers describing essentially the same research should not be published in more than one journal or primary publication. Hence, authors should not submit for consideration a manuscript that has already been published in another journal. Submission of a manuscript concurrently to more than one journal is unethical publishing behaviour and unacceptable. The publication of some kinds of articles (such as clinical guidelines, translations) in more than one journal is sometimes justifiable, provided that certain conditions are met. The authors and editors of the journal concerned must agree to the secondary publication, which must reflect the same data and interpretation of the primary document. The primary reference must be cited in the secondary publication.
- Authorship of the manuscript: Only persons who meet these authorship criteria should be listed as authors in the manuscript as they must be able to take public responsibility for the content: (i) made significant contributions to the conception, design, execution, data acquisition, or analysis/interpretation of the study; and (ii) drafted the manuscript or revised it critically for important intellectual content; and (iii) have seen and approved the final version of the paper and agreed to its submission for publication. All persons who made substantial contributions to the work reported in the manuscript (such as technical help, writing and editing assistance, general support) but who do not meet the criteria for authorship must not be listed as an author, but should be acknowledged in the “Acknowledgements” section after their written permission to be named as been obtained. The corresponding author should ensure that all appropriate coauthors (according to the above definition) and no inappropriate coauthors are included in the author list and verify that all coauthors have seen and approved the final version of the manuscript and agreed to its submission for publication.
- Disclosure and conflicts of interest: Authors should (1) at the earliest stage possible (generally by submitting a disclosure form at the time of submission and including a statement in the manuscript). (2) disclose any conflicts of interest that might be construed to influence the results or their interpretation in the manuscript. Examples of potential conflicts of interest that should be disclosed include financial ones such as honoraria, educational grants or other funding, participation in speakers’ bureaus, membership, employment, consultancies, stock ownership, or other equity interest, and paid expert testimony or patent-licensing arrangements, as well as non-financial ones such as personal or professional relationships, affiliations, knowledge or beliefs in the subject matter or materials discussed in the manuscript. All sources of financial support for the work should be disclosed (including the grant number or other reference number if any).
- Acknowledgement of sources: Authors should ensure that they have properly acknowledged the work of others, and should also cite publications that have been influential in determining the nature of the reported work. Information obtained privately (from conversation, correspondence or discussion with third parties) must not be used or reported without explicit, written permission from the source. Authors should not use information obtained in the course of providing confidential services, such as refereeing manuscripts or grant applications, unless they have obtained the explicit written permission of the author(s) of the work involved in these services.
- Hazards and human or animal subjects: If the work involves chemicals, procedures or equipment that have any unusual hazards inherent in their use, the authors must clearly identify these in the manuscript. If the work involves the use of animals or human participants, the authors should ensure that all procedures were performed in compliance with relevant laws and institutional guidelines and that the appropriate institutional committee(s) has approved them; the manuscript should contain a statement to this effect. Authors should also include a statement in the manuscript that informed consent was obtained for experimentation with human participants. The privacy rights of human participants must always be observed.
- Peer review: Authors are obliged to participate in the peer review process and cooperate fully by responding promptly to editors’ requests for raw data, clarifications, and proof of ethics approval, patient consents and copyright permissions. In the case of a first decision of “revisions necessary”, authors should respond to the reviewers’ comments systematically, point by point, and in a timely manner, revising and re-submitting their manuscript to the journal by the deadline given.
- Fundamental errors in published works: When authors discover significant errors or inaccuracies in their own published work, it is their obligation to promptly notify the journal’s editors or publisher and cooperate with them to either correct the paper in the form of an erratum or to retract the paper. If the editors or publisher learns from a third party that a published work contains a significant error or inaccuracy, then it is the authors’ obligation to promptly correct or retract the paper or provide evidence to the journal editors of the correctness of the paper.
Duties of the Publisher
- Handling of unethical publishing behaviour: In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism, the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum, clarification or, in the most severe case, the retraction of the affected work. The publisher, together with the editors, shall take reasonable steps to identify and prevent the publication of papers where research misconduct has occurred, and under no circumstances encourage such misconduct or knowingly allow such misconduct to take place.
- Access to journal content: The publisher is committed to the permanent availability and preservation of scholarly research and ensures accessibility by partnering with organizations and maintaining our own digital archive.
International Journal of Sciences and Innovation Engineering recognizes the importance of the integrity and completeness of the scholarly record to researchers and librarians and attaches the highest importance to maintaining trust in the authority of its electronic archive.
International Journal of Sciences and Innovation Engineering Policy
It is a general principle of scholarly communication that the editor of a learned journal is solely and independently responsible for deciding which articles submitted to the journal shall be published. In making this decision the editor is guided by policies of the journal’s editorial board and constrained by such legal requirements in force regarding libel, copyright infringement and plagiarism. An outcome of this principle is the importance of the scholarly archive as a permanent, historic record of the transactions of scholarship. Articles that have been published shall remain extant, exact and unaltered as far as is possible. However, very occasionally circumstances may arise where an article is published that must later be retracted or even removed. Such actions must not be undertaken lightly and can only occur under exceptional circumstances. In all cases, our official archives at the National Library of the Netherlands will retain all article versions, including retracted or otherwise removed articles.
This policy has been designed to address these concerns and to take into account current best practice in the scholarly and library communities. As standards evolve and change, we will revisit this issue and welcome the input of scholarly and library communities. We believe these issues require international standards and we will be active in lobbying various information bodies to establish international standards and best practices that the publishing and information industries can adopt.
Article withdrawal
Only used for Articles in Press which represent early versions of articles and sometimes contain errors, or may have been accidentally submitted twice. Occasionally, but less frequently, the articles may represent infringements of professional ethical codes, such as multiple submission, bogus claims of authorship, plagiarism, fraudulent use of data or the like. Articles in Press (articles that have been accepted for publication but which have not been formally published and will not yet have the complete volume/issue/page information) that include errors, or are discovered to be accidental duplicates of other published article(s), or are determined to violate our journal publishing ethics guidelines in the view of the editors (such as multiple submission, bogus claims of authorship, plagiarism, fraudulent use of data or the like), may be “Withdrawn” from Science Direct. Withdrawn means that the article content (HTML and PDF) is removed and replaced with a HTML page and PDF simply stating that the article has been withdrawn according to the International Journal of Sciences and Innovation Engineering Policy on Article in Press Withdrawal with a link to the current policy document.
Article retraction
Infringements of professional ethical codes, such as multiple submission, bogus claims of authorship, plagiarism, fraudulent use of data or the like. Occasionally a retraction will be used to correct errors in submission or publication. The retraction of an article by its authors or the editor under the advice of members of the scholarly community has long been an occasional feature of the learned world. Standards for dealing with retractions have been developed by a number of library and scholarly bodies, and this best practice is adopted for article retraction by International Journal of Sciences and Innovation Engineering:
- A retraction notes titled “Retraction: [article title]” signed by the authors and/or the editor is published in the paginated part of a subsequent issue of the journal and listed in the contents list.
- In the electronic version, a link is made to the original article.
- The online article is preceded by a screen containing the retraction note. It is to this screen that the link resolves; the reader can then proceed to the article itself.
- The original article is retained unchanged save for a watermark on the .pdf indicating on each page that it is “retracted.” The HTML version of the document is removed.
Article removal: legal limitations
In an extremely limited number of cases, it may be necessary to remove an article from the online database. This will only occur where the article is clearly defamatory, or infringes others’ legal rights, or where the article is, or we have good reason to expect it will be, the subject of a court order, or where the article, if acted upon, might pose a serious health risk. In these circumstances, while the metadata (Title and Authors) will be retained, the text will be replaced with a screen indicating the article has been removed for legal reasons.
Article replacement
In cases where the article, if acted upon, might pose a serious health risk, the authors of the original article may wish to retract the flawed original and replace it with a corrected version. In these circumstances the procedures for retraction will be followed with the difference that the database retraction notice will publish a link to the corrected re-published article and a history of the document.
Plagiarism is the unethical act of copying someone else’s prior ideas, processes, results or words without explicit acknowledgement of the original author and source. Self-plagiarism occurs when an author utilizes large part of his/her own previously published work without using appropriate references. This can range from getting the same manuscript published in multiple journals to modifying a previously published manuscript with some new data.
International Journal of Sciences and Innovation Engineering, official publication body for associated journal, Rajkot, Gujarat, India. The International Journal of Sciences and Innovation Engineering is strictly against any unethical act of copying or plagiarism in any form. Plagiarism is said to have occurred when large portions of a manuscript have been copied from existing previously published resources. All manuscripts submitted for publication to International Journal of Sciences and Innovation Engineering are cross-checked for plagiarism using Turnitin software. Manuscripts found to be plagiarized during initial stages of review are out-rightly rejected and not considered for publication in the journal. In case a manuscript is found to be plagiarized after publication, the Editor-in-Chief will conduct preliminary investigation, may be with the help of a suitable committee constituted for the purpose. If the manuscript is found to be plagiarized beyond the acceptable limits, the journal will contact the author’s Institute / College / University and Funding Agency, if any. A determination of misconduct will lead ijsci to run a statement bi-directionally linked online to and from the original paper, to note the plagiarism and provide a reference to the plagiarized material. The paper containing the plagiarism will also be marked on each page of the PDF. Upon determination of the extent of plagiarism, the paper may also be formally retracted.
Types of Plagiarism
The following types of plagiarism are considered by International Journal of Sciences and Innovation Engineering:
- Full Plagiarism: Previously published content without any changes to the text, idea and grammar is considered as full plagiarism. It involves presenting exact text from a source as one’s own.
- Partial Plagiarism: If content is a mixture from multiple different sources, where the author has extensively rephrased text, then it is known as partial plagiarism.
- Self-Plagiarism: When an author reuses complete or portions of their pre-published research, then it is known as self-plagiarism. Complete self-plagiarism is a case when an author republishes their own previously published work in a new journal.
Policy and Action for Plagiarism
International Journal of Sciences and Innovation Engineering respects intellectual property and aims at protecting and promoting original work of its authors. Manuscripts containing plagiarized material are against the standards of quality, research and innovation. Hence, all authors submitting articles to ijsci is expected to abide ethical standards and abstain from plagiarism, in any form. In case, an author is found to be suspected of plagiarism in a submitted or published manuscript then, ijsci shall contact the author (s) to submit his / her (their) explanation within two weeks, which may be forwarded to the Fact-Finding Committee (FFC) constituted for the purpose, for further course of action. If ijsci does not receive any response from the author within the stipulated time period, then the Director / Dean / Head of the concerned College, Institution or Organization or the Vice Chancellor of the University to which the author is affiliated shall be contacted to take strict action against the concerned author.
ijsci shall take serious action against published manuscripts found to contain plagiarism and shall completely remove them from ijsci website and other third-party websites where the paper is listed and indexed. The moment, any article published in ijsci database is reported to be plagiarized, ijsci will constitute a Fact-Finding Committee (FFC) to investigate the same. Upon having established that the manuscript is plagiarized from some previously published work, ijsci shall support the original author and manuscript irrespective of the publisher and may take any or all of the following immediate actions or follow the additional course of actions as recommended by the committee:
- International Journal of Sciences and Innovation Engineering editorial office shall immediately contact the Director / Dean / Head of the concerned College, Institution or Organization or the Vice Chancellor of the University to which the author(s) is (are) affiliated to take strict action against the concerned author.
- International Journal of Sciences and Innovation Engineering shall remove the PDF copy of the published manuscript from the website and disable all links to full text article. The term Plagiarized Manuscript shall be appended to the published manuscript title.
- International Journal of Sciences and Innovation Engineering shall disable the author account with the journal and reject all future submissions from the author for a period of 03 / 05 / 10 years or even ban the authors permanently.
- International Journal of Sciences and Innovation Engineering may also display the list of such authors along with their full contact details on the ijsci website.
- Any other course of action, as recommended by the Committee or as deemed fit for the instant case or as decided by the Editorial Board, from time to time.
It describes the rights related to the publication and distribution of research. It governs how authors (as well as their employers or funders), publishers and the wider general public can use, publish and distribute articles.
All rights reserved. No part of the material protected by this copyright notice may be reproduced or utilized in any form or by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system, without the prior written permission from the copyright owner. However, permission is not required to copy abstracts of papers on the condition that a full reference to the source is given.
International Journal of Sciences and Innovation Engineering Copyright Policy:
Authors note that paper cannot be withdrawn at any condition once it is accepted. The Authors may not publish his/her The Author may not publish his/her contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. The Author warrants that his/her contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others. The Author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. In return for these rights:
- All proprietary rights other than copyrights, such as patent rights.
- The right to use all or part of this article, including tables and figures in future works of their own, provided that the proper acknowledgment is made to the Publisher as copyright holder.
- The right to make copies of this article for his/her own use, but not for sale.
- It is the responsibility of each author to ensure that papers submitted to the journal are written with ethical standards in mind, concerning plagiarism. Please note that all submissions are thoroughly checked for plagiarism. If an attempt at plagiarism is found in a published paper, the authors will be asked to issue a written apology to the authors of the original material. Any paper which shows obvious signs of plagiarism will be automatically rejected and its authors may be banned for duration of 01 years from publishing in Journal. The authors will receive proper notification if such a situation arises.
- This paper has not been published in the same form elsewhere.
- It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
- For any dispute or related violence, it will be discussed and considered only in front of ‘Judiciary of Rajkot, Gujarat, India
Journal Author Rights:
In order for International Journal of Sciences and Innovation Engineering and Its journal to publish and disseminate research articles, we need publishing rights. This is determined by a publishing agreement between the author and ijsci and its Journal. This agreement deals with the transfer or license of the copyright to ijsci and its journal and authors retain significant rights to use and share their own published articles. ijsci and its journal support the need for authors to share, disseminate and maximize the impact of their research and these rights, in ijsci proprietary are defined below:
- For subscription articles: Authors transfer copyright to the publisher as part of a journal publishing agreement, but have the right to:
- Share their article for Personal Use, Internal Institutional Use and Scholarly Sharing purposes.
- Retain patent, trademark and other intellectual property rights (including research data).
- Proper attribution and credit for the published work.
- For open access articles: Authors sign an exclusive license agreement, where authors have copyright but license exclusive rights in their article to the publisher**. In this case authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user license (together with Personal Use rights)
- Retain patent, trademark and other intellectual property rights (including research data).
- Proper attribution and credit for the published work.
*Please note that society or third party owned journals may have different publishing agreements. Please see the journal’s guide for authors for journal specific copyright information.
**This includes the right for the publisher to make and authorize commercial use, please see “Rights granted to ijsci and Its Journal” for more details.
Rights granted to International Journal of Sciences and Innovation Engineering :
For both subscription and open access articles, published in proprietary titles, International Journal of Sciences and Innovation Engineering and its journal is granted the following rights:
- The exclusive right to publish and distribute an article, and to grant rights to others, including for commercial purposes.
- For open access articles, International Journal of Sciences and Innovation Engineering and Its journal will apply the relevant third-party user license where International Journal of Sciences and Innovation Engineering and Its journal publish the article on its online platforms.
- The right to provide the article in all forms and media so the article can be used on the latest technology even after publication.
- The authority to enforce the rights in the article, on behalf of an author, against third parties, for example in the case of plagiarism or copyright infringement.
Protecting Author Rights:
Copyright aims to protect the specific way the article has been written to describe an experiment and the results. International Journal of Sciences and Innovation Engineering is committed to its authors to protect and defend their work and their reputation and takes allegations of infringement, plagiarism, ethic disputes and fraud very seriously.
If an author becomes aware of a possible plagiarism, fraud or infringement we recommend contacting their ijsci is publishing contact who can then liaise with our in-house legal department. Note that certain open access user licenses may permit quite broad re-use that might otherwise be counted as copyright infringement. For details about how to seek permission to use an article see our permission page.
Disclaimer:
The opinions expressed and figures provided in International Journal of Sciences and Innovation Engineering, are the sole responsibility of the authors. The publisher and the editors bear no responsibility in this regard. Any and all such liabilities are disclaimed.
Sharing research, accomplishments and ambitions with a wider audience makes you more visible in your field. This helps you get cited more, enabling you to cultivate a stronger reputation, promote your research and move forward in your career. Sharing your article is an important part of research and it’s important to share responsibly.
Responsible sharing in line with copyright enables publishers to sustain high quality journals and the services they provide to the research community.
Appropriate consents, permissions and releases must be obtained where authors wish to include case details or other personal information or images of patients and any other individuals in International Journal of Sciences and Innovation Engineering publication.
Requirement for Consent:
Appropriate consents, permissions and releases must be obtained where authors wish to include case details or other personal information or images of patients and any other individuals in International Journal of Sciences and Innovation Engineering and its journal publication in order to comply with all applicable laws and regulations concerning the privacy and/or security of personal information, including, but not limited to, the Health Insurance Portability and Accountability Act of 1996 (“HIPAA”) and other U.S. federal and state laws relating to privacy and security of personally identifiable information, the European Union Directive 95/46/EC and member state implementing directives, Canada’s Personal Information Protection and Electronic Documents Act, India’s Information Technology Act and related Privacy Rules, (together “Data Protection and Privacy Laws”).
It is the responsibility of the author to ensure that:
- Each individual, or the individual’s legal guardian or other person with legal authority to act on the individual’s behalf who appears in any video, recording, photograph, image, illustration or case report (or in any other identifiable form) is made aware in advance of the fact that such photographs are being taken or such video, recording, photograph, image, illustration or report is being made, and of all the purposes for which they might be used, including disclosure to Elsevier and use by International Journal of Sciences and Innovation Engineering and Its Journal or its licensees in any work or product. That individual, legal guardian or person with legal authority must give his/her explicit written consent. If such consent is made subject to any conditions (for example, adopting measures to prevent personal identification of the person concerned), ijsci and Its journal must be made aware in writing of all such conditions. Written consents must be retained by the author and copies of the consents or evidence that such consents have been obtained must be provided to ijsci and Its Journal on request.
- The form of written consent complies with each requirement of all applicable Data Protection and Privacy Laws. Particular care should be taken with obtaining consent where children are concerned (in particular where a child has special needs or learning disabilities), where an individual’s head or face appears, or where reference is made to an individual’s name or other personal details.
- In the case of a child, if parents or guardians disagree on the use of the images of that child, then consent should be deemed not to have been given and those images should not be used. It is also important to ensure that only images of children in suitable dress are used to reduce the risk of images being used inappropriately.
- Even if consent has been obtained, care must be taken to ensure that the portrayal and captioning of the individual concerned are respectful and could not be seen as denigrating that individual.
- Special considerations Patients and research subjects’ names, initials, hospital or social security numbers, dates of birth or other personal or identifying information should not be used.
- Images of patients or research subjects should not be used unless the information is essential for scientific purposes and explicit permission has been given as part of the consent. Even where consent has been given, identifying details should be omitted if they are not essential.
- If identifying characteristics are altered to protect anonymity, authors should provide assurances that such alterations do not distort scientific meaning.
Non-Identifiable Images:
- Formal consents are not required for the use of entirely anonymized images from which the individual cannot be identified- for example, x-rays, ultrasound images, pathology slides or laparoscopic images, provided that these do not contain any identifying marks and are not accompanied by text that might identify the individual concerned.
- If consent has not been obtained, it is generally not sufficient to anonymize a photograph simply by using eye bars or blurring the face of the individual concerned.
International Journal of Sciences and Innovation Engineering is a registered International body that publishes scientific original cutting-edge research articles in the field of Engineering, Technology, Science, Management, and Humanities since year 2024. International Journal of Sciences and Innovation Engineering is academic, online, open access (abstract), peer reviewed uses double blind review process.
What is Open Access?
By Open Access, we mean the free, immediate, availability on the public Internet of those works which scholars give to the world without expectation of payment – permitting any user to read, download, copy, distribute, print, search or link to the full text of these articles, crawl them for indexing, pass them as data to software or use them for any other lawful purpose.
Why Open Access?
Funders invest in research in order to accelerate the pace of scientific discovery, encourage innovation, enrich education, and stimulate the economy – to improve the public good. They recognize that broad access to the results of research is an essential component of the research process itself. Research advances only through sharing of results, and the value of an investment in research is only maximized through wide use of its results. Yet, too often, research results are not available to the broadest community of potential users. The Internet provides a new opportunity to bring information to a wider audience at virtually no marginal cost, and allow them to use it in new, innovative ways. This has resulted in a call for new framework to allow research results to be more easily accessed and used a call for Open Access.
Who Benefits from Open Access?
- Researchers:
- Increases readers’ ability to find use relevant literature
- Increases the visibility, readership and impact of author’s works
- Creates new avenues for discovery in digital environment
- Enhances interdisciplinary research
- Accelerates the pace of research, discovery and innovation
- Educational Institutions:
- Contributes to core mission of advancing knowledge
- Democratizes access across all institutions – regardless of size or budget
- Provides previously unattainable access to community colleges, two-year colleges, K-12 and other schools
- Provides access to crucial STEM materials
- Increases competitiveness of academic institutions
- Students
- Enriches the quality of their education
- Ensures access to all that students need to know, rather what they (or their school) can afford
- Contributes to a better-educated workforce
- Research Funders:
- Leverages return on research investment
- Creates tool to manage research portfolio
- Avoids funding duplicative research
- Creates transparency
- Encourages greater interaction with results of funded research
- Businesses
- Access to cutting-edge research encourages innovation
- Stimulates new ideas, new services, new products
- Creates new opportunities for job creation
- Public:
- Provides access to previously unavailable materials relating to health, energy, environment, and other areas of broad interest
- Creates better educated populace
- Encourages support of scientific enterprise and engagement in citizen science
Why start with public access?
“Governments would boost innovation and get a better return on their investment in publicly funded research by making research findings more widely available… And by doing so, they would maximize social returns on public investments.” Organization for Economic Cooperation and Development Widespread access to publicly funded research results is an essential, inseparable component of our nation’s investment in science.
Results of publicly funded research should be shared in cost-effective ways in order to stimulate discovery and innovation, and advance the translation of this knowledge into public benefits Enhanced access to and expanded sharing of information will lead to usage by millions of scientists, professionals, and individuals, and will deliver an accelerated return on the public’s investment in this research.
The aim of International Journal of Sciences and Innovation Engineering is to provide the best choice of user license options which define how readers can reuse open access articles published on our platforms.
International Journal of Sciences and Innovation Engineering and its journal Policy:
- Offer a choice between a commercial and a noncommercial Creative Commons license for gold open access articles in our proprietary titles. The choice is dependent on the journal in which the author chooses to publish.
- Use the user license for our open archive content
- International Journal of Sciences and Innovation Engineering support green open access and accepted manuscripts can be self -archived following our sharing guidelines and are required to attach a CC-BY-NC-ND license.
Choosing a License
Once selected, Creative Commons user licenses are non-revocable. International Journal of Sciences and Innovation Engineering recommend author(s) check if their funding body requires a specific license. See the Creative Commons website for more details about what to consider before choosing a user license. Click here for a full list of user licenses used by International Journal of Sciences and Innovation Engineering
User license |
Read, print and download |
Redistribute or republish the article (e.g. display in a repository) |
Translate the article |
Download for text and data mining purposes |
Reuse portions or extracts from the article in other works |
Sell or re-use for commercial purposes |
CC BY 4.0 |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
CC BY-NC-ND 4.0 |
Yes |
Yes |
Yes, For private use only and not for distribution |
Yes |
Yes |
No |
ijsci |
Yes |
No |
Yes |
Yes |
No |
No |
Please note: Under the CC BY-NC-ND license and for the International Journal of Sciences and Innovation Engineering and its journal user license permitted 3rd party reuse is only applicable for non-commercial purposes. For further details on the rights granted to International Journal of Sciences and Innovation Engineering and Its Journal.
As a general rule, permission should be sought from the rights holder to reproduce any substantial part of a copyrighted work. This includes any text, illustrations, charts, tables, photographs, or other material from previously published sources. Obtaining permission to re-use content published by ijsci is simple. Please write us for a quick and easy route to permission.
Data sharing enables others to reuse the results of experiments and supports the creation of new science that is built on previous findings, making the research process more efficient. Data sharing also supports transparency and reproducibility, building trust in science. International Journal of Sciences and Innovation Engineering and its journal is playing a key role in supporting researchers who want to store, share, discover and reuse data and we are committed to working with other stakeholders to address challenges in making data more effective.
Although much research data is disseminated as part of journal articles, a host of other data is not made available through article publication. This policy concerns research data that often underlies, but exists outside of research articles. Publishers can help make this hidden data discoverable and our research data policy provides the framework for our support and engagement in this important area. The precise notion of what constitutes research data will differ from field to field but broadly speaking it refers to the result of observations or experimentations that validate research findings and which are not already published as part of a journal article. Research data can include but are not limited to: raw data, processed data, software, algorithms, protocols, methods, materials.
Authors can use their articles, in full or in part, for a wide range of scholarly, non-commercial purposes as outlined below:
- Use by an author in the author’s classroom teaching (including distribution of copies, paper or electronic).
- Distribution of copies (including through e-mail) to known research colleagues for their personal use (but not for Commercial Use)
- Inclusion in a thesis or dissertation (provided that this is not to be published commercially).
- Use in a subsequent compilation of the author’s works.
- Extending the Article to book-length form.
- Preparation of other derivative works (but not for Commercial Use).
- Otherwise using or re-using portions or excerpts in other works These rights apply for all ijsci authors who publish their article as either a subscription article or an open access article. In all cases we require that all ijsci journal authors always include a full acknowledgement.
Use by the author’s institution for classroom teaching at the institution and for internal training purposes (including distribution of copies, paper or electronic, and use in course packs and course ware programs, but not in Massive Open Online Courses). Inclusion of the Article in applications for grant funding. For authors employed by companies, the use by that company for internal training purposes.